Sep 28

Buying an iPod Dock

When you plug your iPhone directly into your stereo as I’ve described above there will be a very slight loss of audio quality.   This is because the headphone jack is designed to power headphones, not be plugged into a stereo.  (You can read about the technical differences  here.)  For most people this will probably not be noticeable,  so unless you have a really good stereo with a nice set of speakers the straight cable will work fine.

If however you are after the best possible audio quality into your stereo,  equivalent to or better than a CD player, then can buy a “dock”  for your iPhone.

Apple sell iPod and iPhone docks for the new lightning connecto  here, but for older iPods that don’t have a lightning connector, Apple don’t sell this product any more.   Even their own support article here (dated Feb ’15) now tells you to plug the iPod straight into your home  stereo from the headphone jack.  (This will work, but it is definitely an inferior sound quality to the dock.)

So, for the best sound quality, you need to track down a 2nd hand iPod or iPhone dock that will suit your iPhone or iPod.

In ebay you will need to search for something like this:

“Apple Universal Dock genuine”

“Apple Dock MA045”

“Apple Dock MC746LL”

“Apple Dock A1371”

Or they are still available on Amazon here, here and here.

Plugging in the iPod dock



This is an Apple iPod dock. It has a ‘line out’ output on the back. (The jack on the left in the above picture). The headphone output on the iPod is not a true ‘line out’, it is a headphone level. This is different.  The dock gives you a proper ‘line out’ which will be the exact voltage and impedance to match the ‘line in’ on your stereo. This is important for the best sound quality.

Use exactly the same cable that I talked about above.  The headphone jack and plugs into the ‘line out’  from the dock, and the RCA connectors plug into the back of your stereo.


There are several advantages to the dock. The first one is obviously the better audio quality. You can also leave the audio lead and charger cable plugged into the dock permanently,  so that whenever your phone or iPod is plugged into the dock it will be charging.  The Apple iPod dock also has an infrared receiver on the front which will allow you to control your iPod via any Apple remote control.



Wireless Airplay – no connector!

If you are buying a new stereo, Pioneer and others are now including AIRPLAY into some of their amplifiers. The amplifiers have a Wi-Fi receiver built in which means you can play from your iOS device over your Wi-Fi (Airport) network directly to your Stereo with no loss of quality. You don’t need to connect any cables.

< Previous Page

50 Responses to “How to connect your iPhone or iPod to your home stereo.”

  1. Kris Weigel says:

    I’m having the same problem with connecting my Ipod to my stereo as I did when I tried connecting my satellite receiver (to get the music channels available) to my receiver – the audio/line level signal is so low that I really need to crank the volume on my Denon receiver to hear it. Do I need a pre-amp or other device ?? Thanks

    • Wayne says:

      Don’t need a pre-amp, just turn the iPod up to about half volume, or a bit more. It should have plenty of level.

      • andy H says:

        audio output of the iPhone 5 and 5s are lower than previous iPhones and i too find that you need to set the volume on the iPhone to about 90% (to avoid distortion) and set the AV amp connected higher than would normally be necessary.

  2. Marcia Kneebone says:

    I have an ipod shuffle. Can i connect it to my home stereo receiver thru the aux?

  3. Bane says:

    What to do after plugging in cable?

  4. what about the impedance, the headphone output of an I phone is meant for driving headphone of impedance just 16- 32 ohms and the input of your amplifier is in the 470K – 1M that is 470000 ohms – 1000000 ohms, the sound may come through the amplifier but the quality of the sound suffers, you need to match their impedance by an impedance matching circuit in between the headphone jack and you RCA connector

    • Wayne says:

      Very true – thankyou – I just updated the article to include mention of the dock. You can connect it directly without a dock but yes – it will be a better impedance match with the dock.

  5. diego says:

    hi. great post! i was wondering if this cable is going to suffer the problem of impedance you described. i tried to contacted to them but i didnt get an answer


  6. cathy says:

    I have my Ipad connected to the receiver with the above cable, however it is not playing through all the speakers. When I play a CD thru CD player, all speakers play, when I play on Ipad 2 out of 4 speakers play and the volume is not as loud.

  7. Joel says:

    Cathy I think you may need to swith the cables ( RCA cable) to the cd input and try plugging the 3.5mm end to your ipad. See if that makes a difference

  8. Tina says:

    Hi! This worked beautifully until last night…. I switched from my iPad to iPhone while the stereo was on- oops- it made a loud crackly connecting sound through speakers and now it does not play. I can’t even get a sound from speakers. Did I blow something?? :(. I am so sad in the silence.

  9. Amelia says:

    I can only get sound from one speaker. Not even using this device. I’ve always been able to use sound lead from iPhone to stereo but this is first time I can only get sound from one speaker,,,,,,!,,,,,,

  10. t says:

    I need some “basic” help. Not an audio person. I have a mac and I managed to break off the headphone cable in the audio jack years ago. I do a lot of video editing and the only solution I’ve managed to come up with is using a receiver and speakers to get audio. I plug the speakers into the receiver and the receiver into the back of the computer. I’m looking to downsize my set up b/c I move a lot and this is a pain. My question is, can I some how forgo the receiver and plug directly into the computer. I have about three sets of speakers all of which have regular wiring so they can’t go right into an audio jack. Is there a way to convert those with an adapter? Or is there a cheap and small receiver i can buy ? thanks a lot. My apologies for my audio naivety.

    • Wayne says:

      The level out of the computer is a line level and way to low to drive speakers directly. But your receiver is amplifying the signal and the speakers would not work without it. To simplify you could get a set of powered bookshelf style speakers that have a built-in amplifier. Or yes, you could buy a very small simple amplifier and use your current speakers.

  11. Tom says:

    Thank you for the article—it has helped me start to understand this. I have a quality home stereo set-up and find myself using iPods as music transports more often these days as it’s much more convenient than digging through the cd stash. Instead of purchasing a dock, could I achieve similar results by using a 30 pin to rca cable to access the iPods line-level output (instead of the headphone jack)?
    Thanks again.

  12. Joe says:

    Do I have to have a ipod dock station to play my ipod nano 3rd gen on my old home stereo.

    • Wayne says:

      No, but it will sound better if you do. By better I mean if you are the kind of person who is after the absolute best possible sound. You can just plug the headphone output into any RCA (e.g. AUX, CD) input and it will work fine and not damage anything. If it’s a cheap home stereo or you’re not too fussy then you probably won’t notice the difference.

  13. Edward says:

    I would like to connect an new iPad in to mixer and picture go to tv how can I do that also which cable I have to use. Please help me out

  14. Karli says:

    I have my iPad hooked up to my home stereo with a three prong wire. There are two speakers and sound is only coming from one side. Do you know why this might be? Sound comes out of both speakers when I play a CD.

    Any help on this matter would be greatly appreciated.

    Thank you,


  15. Dan says:

    I hooked my iPhone into my stereo receiver using 3.5mm RCA cable. In order to get acceptable volume level, I have to turn volume on iPhone and stereo way up (too high). Any idea why? Suggestions? Thank you!

    • Wayne says:

      If you turn the iPhone volume up you shouldn’t have to turn the Stereo volume up too high. What kind of cable is it? What brand? What input is it going in to?

  16. Lorenzo says:

    Is there an iPad lightining dock wiyh line out port I can buy?

    I’ve an iPad Air 2 with lightning port I would like to connect to my old JVC stereo amplifier.

  17. Mike says:

    what do you recommend i buy to connect my iPhone6 to my a/v receiver? I went to the send station website, but i am a bit confused as to what i need. Thanks, Mike

  18. Jeff says:

    Which home stero is iPod friendly. Most home stereo’s have hook ups but won,t operate properly, called Denon, they said iPods won’t work I n more then 2 gig. Is their any hone stereo that will work properly.

  19. Oliver says:

    Wayne – I bought the iphone 6 dock the link above goes to and one of the recommended cables. I hooked these up to my system (CD input). I can’t get any sound out of the speakers unless I turn the volume of my iphone 6 and my stereo all the way up. At that point, the sound is very faint. I tested the functionality of each component and everything works as advertised. Can you tell me if the iphone 6 dock still matches impedance? I wondering if this article is no longer valid for the iphone 6. Really it should be updated to say this.

    • Wayne says:

      Sounds strange. I haven’t tried the new lightning dock.

      The iphone 5 lightning dock definitely has line out but the new lightning dock has ‘headphone’ and ‘line out.’ I can’t see how that works – they are different – does it detect what is plugged in? I don’t know.

      Read about it here:

  20. Wayne says:

    If you go through the ‘line out’ option it will work on any stereo with any iPod. The stereo can’t even tell what iPod you are using.

    When they say ” iPods won’t work I n more then 2 gig” they mean interfacing digitally with the ipod through wifi or usb.

  21. George Curtis says:

    I have an ipod nano 7th gen. When I connect the usb plug to the usb socket of my car stereo the car display shows what is playing but there’s no sound. Same as when I connect to home stereo unit. I can’t seem to find any help from the downloaded instruction manual.

  22. Kevin Price-Ward says:

    Like others here I’ve just purchased the lightening dock – which has a headphone out socket. I’ve connected this to my Arcam amp via an audioquest RCA to phone connector. Even setting my 5s to full volume, I really need to crank up the amp (a lot higher than normal when playing CD’s) for it to be acceptable volume, and the sound quality isn’t all that good! Is the headphone out jack on the lightening dock different to line out on the old 30 pin docks line out socket then?? Strange that they would have renamed it headphones out if it’s basically the same thing? But why’s it so quiet? Would I be better off getting an old dock and just converting lightening to 30 pin do you think?

  23. Rinus says:

    Following this discussion for a while now, because i got the same problems connecting my iphone 5s with a “master and slave” PA system. First tried the easy 3.5 mm jack, but got the crackling (exploding) sound very quickly. Then tried the 3.5 mm jack to RCA, but the same problem. I’ve been reading a lot and understand that “line out” on docks is the key. Yet unavailable for lightning connectors. Now in january they come up with a lightning dock, but no line out, but the headphone output. This almost sounds like a joke. Still no solution… Even the 30-pin with line out is no longer available? Otherwise there would be a by-pass the lightning-to-30 pin connector. Could bluetooth help? Putting into the jack connection of the PA system? of still not a match with impedance/ohm/voltage.. ?

  24. Maciej says:

    Too bad, still no good cable solution? I am now using Apple TV, which is connected to Digital/Analog converter. The converter is connected to the amplifier. The sound is very good, much better than line out or headphone out from iphone. The idea is, that apple devices stream digital signal to the converter instead of creating analog signal themselfes (apple sucks at this… the signal is very bad). But the problem is – I don’t want to use Wifi!! AppleTV is not very reliable and the connection drops quite often. Anyone got a good device to get digital audio signal from iPhone via cable?

    • peter lloyd says:

      Thanks for all the comments and ideas. I’m running into the same issue with an older Yamaha NS integrated amp. I’ll look for the docks. I wonder if a preamp would be needed? The 3.5mm H/O into the aux (l/r) works ok…Then I don’t need to worry about new/old/lightning jacks….
      #Maciej: I run a time capsule and apple tv too; I have a second airport at the tv to boost the signal from main location. Also, both are running a faster ‘signal’ so I don’t have those issues you are experiencing.
      Regards all.

  25. Val Reynolds says:

    I have a 2nd generation iPod Shuffle and would like to link it to an amplifier. Is that possible?

  26. Like others here I’ve just purchased the lightening dock – from a online store which has a headphone out socket. I’ve connected this to my Arcam amp via an audioquest RCA to phone connector. Even setting my 5s to full volume, I really need to crank up the amp (a lot higher than normal when playing CD’s) for it to be acceptable volume, and the sound quality isn’t all that good! Is the headphone out jack on the lightening dock different to line out on the old 30 pin docks line out socket then?? Strange that they would have renamed it headphones out if it’s basically the same thing? But why’s it so quiet? Would I be better off getting an old dock and just converting lightening to 30 pin do you think?

  27. Edie says:

    I am trying to connect my iPhone 6 to my pioneer receiver model VSX-84TSi. It has an iPod connection as it is an old model receiver that puts out amazing surround sound. Can I connect my phone somehow so I can play my playlist with good sound? FYI, I went to the Apple Store, spoke with 3 different guys and received 3 different answers.

  28. Big Rig says:

    ok, no problem hooking ipad to bose receiver – now i’d like to connect another ipad so i can control the ipad connected to the receiver – any ideas?

Leave a Reply

Copyright © 2013 Wayne Connor. All rights reserved. | Hosted on Click here to find out why.
preload preload preload